New Products

(Diagram)

• All soldering iron settings (temperature, PID control value, alarm) can be set using a personal computer.
• Soldering iron temperature is managed and recorded automatically on the personal computer.
• ISO9000 and QS9000 obligates to record the temperature condition of soldering workmanship.
• It communicates at a maximum speed of 19.2 Kbps using the RS-485 multi-drop connection between soldering iron and personal computer.
• It collects the temperature of the soldering iron in 1 sec ~ 24 hour intervals and it writes it in the hard disk one after another in .csv (comma-separated values) format.
• When the temperature of the soldering iron goes beyond the setting range (upper and lower limits), it emits and alarm with the personal computer and it records the extraordinary condition.

• Soldering irons are connected to a personal computer through the communication line, which collects and saves the temperature data.
• Collected temperature data can be monitored on PC display.
• A maximum of 30 soldering irons can be controlled by one PC.
• The PC issues an alarm to warn a work supervisor when iron temperatures reach abnormal ranges.
• Saved temperature data can be compiled, indicated in graph and printed using MS Excel and compatible programs.
• Set temperatures and PID parameters of soldering irons can be changed from the PC.

LA (Load Application) System Soldering Station and Iron

• Control method is PID. It has temperature compensation function and various parameter functions.
• In addition to the digital display, it also has an LCD display.  With the digital display, it is difficult to read temperature during actual soldering because the indicated value changes instantly.  The M16 LCD displays the iron tip temperature every 0.2 seconds in a graph.  Therefore, temperature history for soldering can be understood at a glance.
• It is most suitable for obtaining temperature data for soldering and for training operators.
• DPU-414 (Printer option)

AC100 / 240V Free Voltage
 

• It is a standard type of PID controller.
• It is fully equipped with various function such as compensation function of temperature difference between sensing point and iron tip end, upper limit setting function for operating temperature and alarm function for lower limit.

Heater : 40W, 65W

AC100 / 240V Free Voltage
 

Instruments (Equipment) for Soldering

BON-6002

• Flux deterioration and scattering are prevented, because solder is cut in V-shape just before the start of soldering.
• 0.5 mm - 1.6 mm diameter can be handled by changing guide pulley.  (Cutting unit for 2.0 mm diameter is subject to special design)

VFG

• One-hand held soldering iron with automatic thermal adjustment function
• Solder is fed, while V-cut is being formed.
• 1.0 mm ~ 1.6 m diameter can be handled.

• It is excellent in workability and easy to carry.
• Flux replenishment can be done repeatedly.
• Flux vaporization is stopped to keep density constant.
• Dripping is prevented because of proper flow adjustment mechanism.
• It can be used as cleaning brush when charged with alcohol.
• The body is transparent and remaining amount can be known at a glance.

5 pcs. per set; Many types of tips.
 

Digital Tester & Thermometer
 

• Measurement of temperature, leak voltage, and earth line resistance can be all measured by only one unit.
• Control of soldering iron according to ISO9000, QS9000, and MIL standard is possible.
• Sensor can be inserted by one motion, and replacement is speedy.
• Model for 100V, 120V, and 220V are available.

• Temperature retrieval from iron tip by new sensor unit SAT-1 is quite small, and it can precisely measure temperature of very small iron tip used for precision soldering.
• Sensor can be inserted by one motion, and replacement is speedy.
• Conversion between °C and °F is possible.
• There are 3 type of sensors, depending on purpose.

There are several  types of sensors, each with a different purpose for measuring iron tip, dipping solder bath, and surface temperature.

Can be connected with LA Soldering Irons.
 

NLA Soldering Iron & Ceramic Heater Irons
 

• Noise influence is almost none, because zero-volt switching circuit is used as control circuit.
• Temperature control range is ± 4°C.
• Insulating resistance is 500 M ohms at 400 °C (for 150 hrs.).
• Heat rise is fast due to high watt density, and it is very suitable for soldering which needs large heat supply like part removal or IC soldering.
• Temperature control situation can be known by looking at neon light ON/OFF.
• SS-5000FP uses ceramic heater which have 2 times greater power than SS-1005A, and therefore it is very suitable for soldering which needs more heat supply.
• Types for power source of 100V, 110V, and 220V are available.

• Iron tip and heater can be changed easily, depending on needed energy for parts to be soldered.
• It will become ceramic iron with simple thermal adjustment function, if optional CRC-150 is added.

CRC-150

• Temperature adjustment is made by 10-scale knob.  Please find out iron tip temperature at each scale by using our digital thermometer MCA-900.
• It can be used after removing earth pin, because the pin is screw in type.