Mabuhay! Welcome to MVENT Philippines, Inc.!
    
Impell

Home
 

Industrial Products
 
Electronic Products
 
Consumer Products
 
Radiators
 
Communication Systems
 


Impell Logo

The Power in Purification


Click here for Image Gallery

Why use filtration on process exhaust fumes?

Flexibility

Filtration systems can be easily moved or relocated on the floor with little to no hassle.

Reduction or installation costs since venting to the outside requires expensive ductwork installation.

No environmental permits required for filtration and recirculation.

Start-up times and start-up costs are shortened to a minimum.

Compliance with ISO 14000

Bring your company in compliance with the ISO 14000.   These standards will set environmental compliance requirements for manufacturing.   Impell's filtration systems will be of great value to you when applying for certification.

Reduction of Air Conditioning Costs

Less make-up air.  Venting exhaust fumes to the outside requires bringing in the same amount of new make-up air into the plant.  Less make-up air means often lower utility costs.

Elimination of Fire Hazards Inside Ductwork

Long duct-runs result in buildup of contaminates which is a potential fire hazard.  Local filter units with short duct-runs allow for higher air velocities thus eliminating buildup of contaminates.

Better for the Environment

Your company's image improves because you are no longer considered a contributor to the pollution of our planet.

You are improving your public image and are providing better and healthier air for your workers.


Filter Units

The use of a HEPA filter alone does not make a filter unit a good system.  The high standards of HEPA efficiency (99.97% at 0.3 micron) must also be met by the filter unit housing.  IMPELL therefore provides you with an internally sealed filter chamber to eliminate any air leakage.

Additionally, the features of our filter units provide you with many more benefits:

  • Compact design with small overall size
  • Easy filter access
  • Brushless motor turbines with high static pressure for Series F1200 and F3000
  • Impeller type fans with optimized performance of suction power, airflow and power requirement
  • Low noise level due to sound baffles and acoustical liner
  • Convenient control panel with filter monitor
  • Appealing design
  • Filter units for gaseous filtration are explosion rated and feature external controls.

IMPELL manufactures a complete line of filtration systems for exhaust removal at 20 cfm to more than 2000 cfm.

 
 

 

Model #

Airflow
(cfm)

Dimensions

Weight

 

20-185

13.5" x 18"
x 26"

85 lbs.

185-400

20" x 20"
x 41"

180 lbs.

F3000GX

100-500

20" x 20"
x 41"

250 lbs.

600-1200

26" x 26"
x 49"

270 lbs.

600-2000

39" x 26"
x 50"

380 lbs

F8200GX

100-500

39" x 26"
x 70"

500 lbs.


Click on the model numbers for more details.  This may take a while to load.

 

Filter Designs

Depending on the application IMPELL selects the right method of filtration for your needs:

  • Particle filtration
  • Gas-phase filtration
  • Combined particle and gas-phase filtration

The efficiency in particle filtration can vary from 60% (ASHRAE) to HEPA efficiency (99.97% at 0.3 micron) or better for special applications.

The efficiency in gas-phase filtration needs to be determined on a case-by-case basis. We utilize extensive filter design software to advise you with efficiency ratings and filter media life spans.

 

Click here for Image Gallery


Contact Us  

Back to top Back to top

 

F1200 Series ] F3000 Series ] F3000GX / F8200GX Series ] F5200 Series ] F8200 Series ]


  Site Search ] Site Map ] Image Gallery ] Resource Links ] About Us ] Contact Us ]


Copyright © 1998-2004 MVENT PHILIPPINES, INC.
Last Updated: Wednesday, April 19, 2006 / 03:07:35 AM

This site is optimized for Internet Explorer 4 and above at 800 x 600 or higher resolutions
For questions and comments about this site, email the
webmaster.