|
SAW 2000-02 |
SAW Series filter / regulators are packaged in a space
saving combination for accurate regulation and filtration. This
model uses a common inlet and outlet, saving on space, set up time and
piping. It comes standard with bracket gauge, features which are
optional with most FR units. The filter removes liquid and oil
contaminants, which shorten equipment life, while the regulator
maintains precise control and conserves compressed air energy, offered
in 1/4" & 3/8" NPT sizes. |
|
SAF 3000 |
SAF filters are designed to remove solid and liquid
contaminants down to 5 microns, which may cause wear and tear on
equipment, hinder performance and ruin product finish. Units
have threaded ports for direct pipe connection. They all have
polycarbonate bowls. |
|
SAR 4000 |
SAR Series regulators provide accurate and constant
air pressure control, as required by specific pneumatic equipment,
producing stable and repeatable (low hysteresis) output.
For general-purpose uses such as pumps, pressure tanks and other air
operated devices. Can be mounted up or down, increasing user
flexibility. Available in two models, tamper resistant precision
T-handle or easy self-adjusting Knob-handle. |
- Lubricators
|
-
SAL 3000
|
SAL Series lubricators are installed close to the
downstream equipment. Lubricators ensure pneumatic devices
receive the proper amount of lubrication to maintain operating
performance, reduce wear and prolong equipment life. Features
transparent sight dome for drip rate viewing and polycarbonate bowl.
|
- Auto Drains
|
SAD 402 |
SAD Drains are offered in two models. The newly
designed SAD 402 Series features a built-in strainer for preventing
failure due to an accumulation of contaminants and the SAD 502 Series
with a compact designed drain for easy cleanout. Accumulated
liquids cause the automatic float drain to rise admitting air pressure
in the piston chamber, opening the bleed valve and allowing the liquid
in the bowl to be expelled under pressure. When the liquid level
drops sufficiently, the float closes and draining stops. Max.
140 psi. |
- Electronic
Drains
|
|
The Electronic Drain consists of a timer operated
solenoid valve and drain. Set for 1 to 45 minute cycle time and
.25 to 25-second valve on-time. Ideal for pipe legs,
aftercoolers, dryers and compressor tanks. Available in 1/8",
1/4", 3/8" and 1/2" NPT with 250 max. psi, 120V, 60 cycle. |
-
Pneuguard®
In-Line Series
|
SPG 100DC |
SPG Series is for use on air hoses, no more than six
feet from the tools. Our In-Line Dryer model provides clean dry
air for cylinders, actuators, gauges and motors. The In-Line
Desiccant / Dryer offers reduced dew point dry air for spray painting
and the In-Line Lubricator models provide lubrication for air hammers,
drills and other rotating equipment to minimize wear. |
- Hand Valves
|
|
SHV Series with the base or panel mounting feature
allows for easy installation. Available as 2-way or 3-way with
1/4", 3/8" or 1/2" NPT. Operates up to 140 psi and is ideal for
industrial applications where quality and economy are essential. |
- Foot Valves
|
|
SFVM Series. Depressing, releasing and maintaining
foot pressure activates piston movement. Available as 2- or
3-way with 1/4" NPT. |
- Mechanical
Valves
|
|
SMV Series is activated mechanically by a machine
element and is ideal for powering small and medium size cylinders and
piloting larger valves. Operating up to 140 psi. They are
available as 2-way or 3-way with 1/4" NPT. Models include
micro-stem, roller arm or palm button actuators. |
- Quick
Exhaust Valves
|
|
SQE Series. This in-line valve dumps exhaust
air quickly at the cylinder to speed up movement of cylinders, air
presses and other equipment. Operates up to 140 psi and comes in
1/4", 3/8" and 1/2" NPT. |
- Speed
Controllers
|
|
SAS Series provides inline flow control which helps
manage the speed of moving pistons and actuators. They can be
adjusted by hand and locked in position, operates up to 140 psi, and
are available in 1/8", 1/4" and 3/8" NPT sizes. |
Back
to top
 |
®
