The systems table shows the
torque range for the M-Series (hand operated). The RPM is automatically selected
in accordance with the torque value you program in the controller.
Each model has the ability to
switch to either standard or high speed using the customized software.
If you require any specific RPM
for a certain fastening torque, please feel free to contact a customer service
representative. We need to know your specific fastening torque in use, so we can
determine if the RPM you require can be achieved.
**Not offered in M-Series
available with torque range in Lbf.in
M-Series Drivers with automatic recognition
The M-Series driver units have a
forward/reverse with a lever type on/off switch that activates the motor. The
M-Series drivers can be connected to both the PED III and FED III controller and
is used in hand operated applications. The M-Series drivers are equipped with a
1/4 female quick-change chuck. The FH model is equipped with a bit cushion
mechanism. The bit has a moveable range of 10mm in the axis direction. The
driver unit can keep the same bit pressure anywhere within the moveable range.