TK-1 Solder Paste - Tackiness Tester

TK-1 Electronic Tools Discontinued
Product discontinued

The Malcom TK-1 Tackiness Tester is widely used to help our customers predict solder paste tack time, limiting the potential for dropped components, using either the IPC, Depth Method, or JIS Standard Test. These three convenient testing methods for tackiness allows you to determine component drop time to loss of adhesion, and thus avoiding costly rework. Tackiness refers to combined force of the cohesion and adhesion. In many cases, chip parts are held on the board by the paste's tackiness during reflow. It is at this time that defects occur from chips falling off the board; or being displaced by the vibration of the chip mounter after some time has elapsed, since printing or when tackiness is reduced by reflow heat.

Sensor range 0 - 500 gf
Sensor resolution 1 gf
Measurement methods Continuous preload, JIS Point Preload, IPC Insertion depth
Parameters measured Tackiness: 0 - 500 gf
Preload: 0 - 500 gf
Insert depth: 0 - 200 mu meters
Preset ranges Preload: 20 - 500 gf
Time: 0.1 - 99.9 sec
Speed: 0.1 - 10.0 mm/sec
0.2 - 9.9 mm/min
Depth: 20 - 200 mu meters
Outputs Analog: 1 gf/10mV
Digital: RS-232C
Accessories Hand printer with 0.2 mm mask test piece,
5.1-mm diameter probe control and data analysis software
  • Quantifies solder-paste tackiness.
  • Determines component drop-time, thus reducing costly rework.
  • Three testing methods available.
  • User-variable measurement conditions (time, preload, depth, and speed).
  • Digital display of measured tackiness, real preload, and real insertion depth.
  • Online computing capable with included PC software.
Interested in the TK-1 Solder Paste - Tackiness Tester? Our team responds within one business day.
Inquire This Product
← Back to Malcom