M-Series Driver
The systems table shows the torque range for the M-Series (hand operated). The RPM is automatically selected in accordance with the torque value you program in the controller.
Each model has the ability to switch to either standard or high speed using the customized software.
If you require any specific RPM for a certain fastening torque, please feel free to contact a customer service representative. We need to know your specific fastening torque in use, so we can determine if the RPM you require can be achieved.
| Model |
Output |
Setting |
Minimum |
Standard Speed | High Speed |
| 1200 |
0.3-1.2 |
0.24-1.35 |
0.01 |
350-1,300 |
- |
| 2200 |
0.5-2.2 |
0.5-2.4 |
0.02 |
130-750 |
- |
| 3600 |
1.0-3.6 |
0.8-4.0 |
0.02 |
160-540 |
270-780 |
| 8500 |
2.0-8.5 |
1.6-10.0 |
0.01 |
60-320 |
100-650 |
| 12K |
3.0-12 |
2.7-13.0 |
0.1 |
40-160 |
150-500 |
| 15K |
4.0-15 |
3.5-16.5 |
0.1 |
30-100 |
150-450 |
| 20K |
5.0-20 |
4.5-22.0 |
0.1 |
25-110 |
60-250 |
| 30K** |
7.0-30 |
7.0-30 |
0.1 |
25-110 |
40-160 |
|
Models are available with torque range in Lbf.in |
|||||
M-Series Drivers
with automatic recognition
The M-Series driver units have a forward/reverse with a lever type on/off switch that activates the motor. The M-Series drivers can be connected to both the PED III and FED III controller and is used in hand operated applications. The M-Series drivers are equipped with a 1/4 female quick-change chuck. The FH model is equipped with a bit cushion mechanism. The bit has a moveable range of 10mm in the axis direction. The driver unit can keep the same bit pressure anywhere within the moveable range.
|
Drivers |
Description |
Bit |
System Models |
||
| M |
S |
A |
|||
|
SD |
- |
- |
Without bit cushion |
4 mm Dia. D-Cut |
1200, 3600, 8500, 12K |
|
FD |
- |
- |
With bit cushion |
4 mm Dia. D-Cut |
1200, 3600, 8500, 12K |
|
SH |
- |
- |
Without bit cushion |
1/4" Hex |
8500, 12K, 15K, 20K |
|
FH |
- |
- |
With bit cushion |
1/4" Hex |
8500, 12K, 15K, 20K |
|
- |
SD |
SD |
Without bit cushion |
4mm Dia. D-Cut |
1200, 2200, 3600, 8500, 12K |
|
- |
FD |
FD |
With bit cushion |
4 mm Dia D-Cut |
1200, 2200, 3600, 8500, 12K |
|
- |
- |
SH |
Without bit cushion |
1/4" Hex |
8500, 12K, 15K, 20K, 30K |
|
- |
- |
FH |
With bit cushion |
1/4" Hex |
8500, 12K, 15K, 20K, 30K |
Model
Number Configuration
The product line-up offers several choices to meet your requirements. The
following will explain how to specify a model.
System (a controller + a driver unit) = 
 |
Controller Models: PED III and FED III |
 |
Model Series: M, S and A |
 |
Driver Unit Models: 1200, 2200, 3600, 8500, 12K, 15K, 20K and 30K |
 |
Configurations: SD, FD, SH, and FH |
Example: PED III-M 8500-SH
Bit
Sleeve & Guide
A bit sleeve is unique to the application. In order to complete the order for
your system, we require:
- Sample of a fastener or dimensions of fastener
- Specific driver style being used
- Shank diameter
- Special requirements i.e. space restrictions
User-friendly Windows 95/98/NT® based software is available to customize the functions and parameters of the PED III or FED III controller.
- LED (for M and S drivers)
- Screw binding release
- Trigger switch and forward/reverse switch (for M and S drivers)
- Dual torque: Manual or Auto change-over (for PED III)
- Slow start for initial engagement to minimize shock and cross threading of fasteners.
- Changeable unit measure (kgf.cm, N.m, Lbf.in)
- Driver unit LED functions
- Standard speed fastening setting
- High speed fastening setting
- Holding time of peak torque (0-200ms)
- Screw binding release function parameters
- Reversing parameters (FED III only)
- Idle mode parameters (FED III only)
- ATC (Auto Torque Compensation) fine-tuning to adjust the mechanical characteristics of the driver unit.
A programmable multi-sequence operation without a PLC (FED III) is available with the customized software.
← Back to Technart